PGI Sawbuck Four-Ply Para-Aramid Original Chain Saw Chaps | Orange
Offering 180° chainsaw protection across the front of your legs, these Sawbuck 4-Ply Chainsaw Chaps are made of a 1000D Nylon shell fabric which also offers water resistance, as well as resistance to mildew, oil and moisture in general. Four layers of Para-Aramid, two of which are woven and two of which are felt give you trusted chainsaw protection. With additional functionality, these chainsaw chaps also feature a handy tool pouch with a cover flap and a snap closure attached to the belt. Adjustable with a 2" wide nylon belt, 1' wide nylon leg straps, these chainsaw chaps will not only offer protection from potential chainsaw cuts, but are a bright hi-vis orange color giving you additional safety. Designed to fit most sizes, Sawbuck Chainsaw chaps are available in waist sizes 32" to 46".
PGI Sawbuck Original Chainsaw Chaps Specifications:
- Chainsaw Chaps are constructed with two plies of woven para-aramid and two plies of para-aramid felt
- Shell of these chainsaw chaps is 1000 denier nylon front and back and urethane-coated to prevent penetration of liquids
- Two-inch wide waist belt and one-inch wide leg straps of heavy poly propylene webbing with adjustable quick-release Delrin buckles
- A three-compartment tool pocket with snap flap closure is sewn into waist belt of chainsaw chaps
- Chainsaw Chaps fit waist sizes 32” to 46”
- *Extender belt available - adds up to 13" to waist of chainsaw chaps. Special Order - Call 318-313-9381 for more information
- Chainsaw Chaps are available in forest green and orange. Click here for Forest Green Chainsaw Chaps
- Length is measured from the waist down to two inches below the top of your boot
- Be sure to measure and determine the proper length before ordering
PGI Sawbuck Chainsaw Chaps Safety Ratings
- NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting- Current Edition - UL Classified
- UL Classified to ASTM Designation F 1897-20
- Built in accordance with U.S. Forestry Specification 6170-4G
PGI Instructions for Care & Maintenance of Original Chainsaw Chaps
- Wash chainsaw chaps using scrub brush, warm water and detergent
- Stubborn stains may require treating first with a dry cleaning solvent
- Do Not Bleach, Machine Wash or Machine Dry Chainsaw Chaps
- Do not repair ~ any time chap is cut, it must be professionally serviced
- *Failure to properly clean and care for this chap may reduce the level of protection offered to the user and increases the risk of injury